Board method - List of Manufacturers, Suppliers, Companies and Products | IPROS

Board method Product List

1～10 item / All 10 items

Displayed results
Anti-corrosion coating and sheet lining method D type, Zickboard T method

Anti-corrosion coating and sheet lining method D type, Zickboard T method

Can be applied in wet surfaces and high humidity, easy to install, reducing construction time.

▼Overview The Zickboard T method involves applying an inorganic mortar to a concrete structure or after cross-section repair, and immediately pressing the Zickboard onto it to achieve full adhesion with the concrete structure. This method eliminates the need for support materials and allows for a shortened construction period. ▼Features - The joints of the Zickboard T method are constructed with FRP molded products installed with a corrosion-resistant sealing material, creating a double structure that provides durability to prevent damage at the joint areas. - The inorganic mortar used for adhering the Zickboard can bond to wet surfaces of the concrete substrate, making it suitable for construction in high humidity environments.

  • Sewerage facilities
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-corrosion coating and sheet lining method D type, Jickboard K method

Anti-corrosion coating and sheet lining method D type, Jickboard K method

Since the sheet adhesion is completed during the formwork removal, it is possible to shorten the construction period.

▼Overview The Zickboard K method involves attaching 2mm Zickboard to the formwork during the construction of treatment facilities and directly adhering it to the concrete structure. Since the application of the Zickboard is completed when the formwork is removed, this method allows for a significant reduction in construction time compared to other sheet lining methods. ▼Features - Zickboard has good workability and can be cut to match the shape of the formwork. It can also be installed using plastic nails or similar fasteners. - The joints and separator ends of the Zickboard K method are equipped with FRP molded panels and corrosion-resistant sealants, providing durability features that prevent damage to the joints. ▼Method Standards Complies with the quality standards of the Japan Sewage Works Agency's "Manual for Corrosion Control and Anti-Corrosion Technology for Concrete Structures in Sewage Systems," specifically the D-type formwork sheet lining method.

  • Sewerage facilities
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
D-Lite D Board Method ~ 3M × DAIKEN ~

D-Lite D Board Method ~ 3M × DAIKEN ~

Next-generation D-board (wall panel) construction method that balances design quality and processability like wood [non-combustible certification obtained].

The D Board method involves laminating 3M's 3M TM Di-Noc TM film onto a non-combustible substrate in the factory and then installing it on walls at the construction site. The Dailight D Board method uses a non-combustible material called 'Dailight,' made from DAIKEN's mineral fibers and volcanic ash glass materials, as the substrate. *Please refer to the materials below. 【Conventional D Board Method】 By manufacturing all boards in the factory and installing the completed boards, on-site work can be made more efficient. Since processing boards on-site is difficult, precise pre-measurement is necessary for board production. 【Dailight D Board Method】 Layout and board production are done based on drawings. Dailight has very high workability, allowing for on-site processing such as cutting edge boards and touch-up painting, which reduces the pre-measurement process and significantly shortens the overall delivery time. Since there is no film application work on-site, it is also recommended for customers who have never used the conventional D Board method!

  • Other wall materials
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Factory installation / D-board method × on-site installation [Comparison video digest]

Factory installation / D-board method × on-site installation [Comparison video digest]

This is a video digest comparing the work time and finish between the factory-applied D-board method using the highly processable non-combustible base material Dailight and the on-site application.

【Comparison of Factory Application / D Board Method and On-Site Application Method in Video】 The comparison video digest presented in this content illustrates the differences in workability between the method of applying 3M TM Di-Noc TM film wrapped on all sides in a factory before installation on-site (Factory Application / D Board Method) and the method of applying 3M TM Di-Noc TM film on-site after first installing the calcium silicate board (On-Site Application). Using panels approximately the size of A4, we compare the differences in work time, processes, and finishes (joints and edges) under the same conditions. In the On-Site Application, in addition to the installation of the substrate board (by board craftsmen), the application of Di-Noc on-site (by Di-Noc craftsmen) is required, which tends to result in longer work times. On the other hand, when using panels with 3M TM Di-Noc TM film applied in the factory, the focus on-site is primarily on panel installation, simplifying the process. Furthermore, if the base material of the D Board used here is "Dailight D Board," which utilizes the workability of the non-combustible base material Dailight, it can be proposed as a D Board method that allows for easier on-site adjustments by carpenters and decorative panel craftsmen. Please use this as a comparison content to consider the adoption of methods and selection of base materials.

  • Other wall materials
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gainah SH sheet board method (tunnel, concrete structure reinforcement)

Gainah SH sheet board method (tunnel, concrete structure reinforcement)

Existing Tunnel Reinforcement Method Using "CFRP" Bonded Plates - Achieving Effective Tunnel Interior Reinforcement with High-Strength CFRP Using Carbon Fiber Sheets and Separators.

■NETIS Number: KT-230046 Technology Name: Fiber Sheet Adhesive Method for Tunnel and Bridge Repair and Reinforcement "Gaina SH Sheet Board Method" * Reinforcement with a single-layer laminated fiber sheet using high-density carbon fiber (compared to conventional multi-layer). * Compared to our carbon fiber sheet method of overlapping, this method is expected to shorten construction time and reduce costs. * Lighter than our steel plate adhesive method. No anchor work is required due to adhesive application. Fewer processes are needed compared to our continuous fiber sheet method. * High strength allows for strip placement. Unfinished areas between strips can be visualized, enabling visual confirmation of crack progression after reinforcement. * High-performance impregnation agents ensure reliable impregnation, allowing for high-quality construction. * No specialized skills are required for application and impregnation work, making it easy to secure construction personnel. * As a fiber sheet adhesive method, partial construction and partial adhesion are possible. It is flexible, allowing for easy application in corners.

  • SH3.JPG
  • SH.JPG
  • シート貼付.JPG
  • Bridge Materials
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Treatment Facility (Wastewater Treatment Tank) Jickboard T Method

Water Treatment Facility (Wastewater Treatment Tank) Jickboard T Method

Introduction to the sheet lining method with high durability, which allows for easy construction and shortened construction periods.

This technology is a corrosion protection method for the inner surface of tanks that can be applied on wet surfaces or in high humidity conditions. After applying a special mortar to the concrete structure or after section repair, a jig board is pressed onto it immediately after application, achieving full adhesion with the concrete structure. This method eliminates the need for support materials, allowing for a shortened construction period. Additionally, FRP molded products are installed with a corrosion-resistant sealing material to create a double structure, providing high durability that prevents damage to the joint areas. 【Features】 ■ Can be applied on wet surfaces or in high humidity ■ Easy application reduces construction time ■ No need for support materials ■ The special mortar for adhesion can bond to wet surfaces of the concrete substrate *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-corrosion coating and sheet lining method D type, Zicboard GR method.

Anti-corrosion coating and sheet lining method D type, Zicboard GR method.

Reduction of life cycle costs with a durability of 50 years.

▼Overview The Zick Board GR method has a construction track record of over 20 years, and based on follow-up survey results of operational facilities and promotion test results, it has been verified that even 50 years after completion, it can maintain the performance of "adhesion stability," "sulfuric acid resistance," and "barrier properties," ensuring a service life of 50 years. By having a service life of 50 years, it enables a reduction in lifecycle costs compared to coating-type lining methods and other sheet lining methods. ▼Features - The joints of the Zick Board GR method have a triple structure consisting of FRP molded products on the surface and back, along with corrosion-resistant sealing materials, providing excellent durability functions that prevent damage to the joint area due to stress concentration and other factors. - The Zick grout injected into the back of the Zick Board can also serve as a cross-section restoration process after the removal of deteriorated areas during renovation work.

  • Sewerage facilities
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-supporting manhole rehabilitation method Jickboard J method

Self-supporting manhole rehabilitation method Jickboard J method

A new manhole inside an existing manhole.

The Jickboard J method is a self-supporting manhole rehabilitation technique that provides performance equivalent to that of newly constructed manholes, using only rehabilitation materials for existing manholes that cannot be expected to withstand corrosion or aging. It is a unique method that combines Jickboard, Jick grout, and Jick grid into a single rehabilitation material, offering load-bearing and seismic performance comparable to newly constructed manholes. ▼Features - It can be adapted to facilities under very harsh conditions or those requiring long-term durability. - Jickboard is a factory-molded product with a homogeneous, high-density corrosion-resistant coating that has excellent barrier properties, eliminating the risk of permeation by corrosive substances. - The joints have a double structure of molded products and corrosion-resistant seals, providing excellent durability features that prevent damage to the joint areas due to stress concentration and other factors.

  • Manhole body
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Composite manhole corrosion protection method (Type D) Jickboard M method

Composite manhole corrosion protection method (Type D) Jickboard M method

Rehabilitation is possible regardless of the shape of the manhole (circular or rectangular).

The Zickboard M method is a construction technique that combines the performance required for manhole rehabilitation and corrosion prevention. The Zickboard is installed with a gap on the inner surface of the existing manhole, and Zick grout is filled into this gap. This allows the three-dimensional cross on the back of the Zickboard and the Zick grout to interlock firmly, integrating the Zickboard with the existing manhole to withstand external forces. ▼Features - It can be adapted to facilities in extremely harsh environments or those requiring long-term durability. - The Zickboard is a factory-molded product with a homogeneous, high-density corrosion-resistant coating that has excellent barrier properties, preventing the penetration of corrosive substances. - The joints are designed with a double structure of molded products and corrosion-resistant seals, providing excellent durability features that prevent damage to the joint area due to stress concentration and other factors.

  • Manhole body
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ダイライトDボード工法【施工動画ダイジェスト】

ダイライトDボード工法【施工動画ダイジェスト】

工場生産パネル×現場調整のハイブリッド工法で現場を“納めきる”｜未経験でも施工OK！リアル施工動画ダイジェスト

取り付けのやり直しリスク減＆納期短縮！木工職人をはじめとするDボード工法未経験の方でも施工可能な次世代工法です。 Dボード工法は、3M TMダイノック TM フィルムを工場でラミネート加工してパネル化し、現場で壁面に取り付ける工法です。しかし、現場で最終的な寸法調整が必要な場合、従来のDボード（ケイカル基材）は切断や加工が難しく、ボード取り付けのやり直しなどの手間がかかることが課題でした。 ダイライトDボード工法は、不燃基材に『ダイライト』を使用することで、木材のような扱いやすさを実現。のこぎりやカッター、サンドペーパーなど一般的な道具で現場での微調整が可能です。これにより未経験の方でも“その場で納めきる”施工が実現可能です。現場での調整が容易になり、ボード取り付けのやり直しリスクが減り、工期短縮やトータルコストの改善、工程の安定化につながります。 【動画の見どころ】 本資料は、Dボード工法未経験の木工職人が実際に施工する4分間の動画ダイジェストです。 特別な道具を使わず、現場で“納めきる”リアルな様子を収録。自然体な施工風景を通じて「これなら自分でもできそう!」と実感いただけます。

  • Other wall materials
  • Board method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Board method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.